TeltonikaGH5200
Device Plugin Change Log
Teltonika build 6862 (2022-09-23)
- Add FMC00A, FMC13A, FMM00A, and FMM13A devices
Teltonika build 6833 (2022-09-16)
- Add BLEFuelLevel{1..4} for FMB130, FMC130 devices
Teltonika build 6804 (2022-09-07)
- Add support for BLE_FuelFrequency and BTStatus for FMB920 device
Teltonika build 6765 (2022-08-24)
- Add support for EYE sensors for FMB125, FMB640, FMB910, FMB920, FMC130 devices. Supported signals include: Temperature, Humidity, Magnet, Battery Voltage, Low Battery, Angle-Position, and Movement
- Add DigitalInput1/2/3, DigitalOutput1/2/3 for FMB204 device
Teltonika build 6750 (2022-08-18)
- Add new signals for Teltonika FMB001 & FMC001 devices:
•DTC Count (AVL 30)
•DTC Faults Count (AVL 160)
•DTC Faults Codes (AVL 282) - Add support for BLE Temperature and Humidity sensors for FBM910 device
Teltonika build 6742 (2022-08-17)
- Teltonika Iridium Edge fixes
Teltonika build 6734 (2022-08-10)
- Add support for DigitalInput1 for Teltonika FMC130
- Add support for Teltonika Iridium Edge
Teltonika build 6719 (2022-07-19)
- Add support for ImpulseCounterFrequency1,ImpulseCounterRpm1, ImpulseCounterFrequency2, ImpulseCounterRpm2 and ImpulseCounter2 for FMB640 and FMC640 devices
Teltonika build 6707 (2022-07-08)
- Add support for Tire1GraphicalPosition - Tire24GraphicalPosition and Tire1SensorId - Tire24SensorId for Teltonika FMC640
- Add support for TripOdometer, TotalOdometer, DigitalOutput2, DigitalOutput3,DallasTemperature1 - DallasTemperature4 for Teltonika FMC130
- Add support for DallasTemperature 2, 3, 4 for Teltonika FMB130
Teltonika build 6627 (2022-06-08)
- Increase buffer for Dualcam protocol
Teltonika build 6625 (2022-06-07)
- Add BLE_{1..4}_Sensor_Custom{1..5} for FMC130 device
Teltonika build 6583 (2022-05-24)
- Add DataMode, SleepMode, BTStatus, AxisX/Y/Z for FMC130 device
- Fix parsing Manual CAN values
Teltonika build 6576 (2022-05-20)
- Add ICCID1/2for FMB120, FMB140 devices
- Add TripOdometer for FMB120, FMB122, FMB125, FMB140, FMU125 devices
Teltonika build 6563 (2022-05-13)
- Add LinkModeString for FMC125 device
Teltonika build 6535 (2022-05-09)
- Add towing for FMB130 device
- Add support for BLE and Beacon signals for FMC130/TFT100 devices
Teltonika build 6470 (2022-04-13)
- Add DigitalInput{1..3} for FMM130 device
Teltonika build 6461 (2022-04-07)
- Add FMB910, FMB900, FMB965, FMB230, FMC230, FMM230, FMB240, FMC225, FMB225, FMB209, FMC125, MSP500, TRB245, TRB255, RUT956, RUTX09, RUTX11, RUTX12, RUTX14 devices
- Fix parsing SecurityStateFlags for FMB120 device
- Add Towing for FMT100 device
- Fix parsing sms messages with TimeStamp
- Add AnalogInput1 for FMU130 device
Teltonika build 6441 (2022-03-28)
- Add FMB641 device
Teltonika build 6431 (2022-03-22)
- Add TPMS_TotalTires, TPMS_TotalAxles, TPMS_GraphicalPosition, TPMS_Tire{1..24}Pressure, TPMS_Tire{1..24}Temperature, TPMS_Tire{1..24}Warning for FMC640 device
Teltonika build 6321 (2022-02-11)
- Fix LinkModeString value
Teltonika build 6302 (2022-02-07)
- Set save_changes_only = false for MovementEvent variable
- Add VIN for FMC130 device
Teltonika build 6194 (2022-01-12)
- Add FMC001 device
- Fix FuelUsedGPS and AverageFuelUse values
Teltonika build 6188 (2022-01-10)
- Fix LinkModeString value
- Add IgnitionOnCounter for FMB130 and FMU125 devices
- Add InstantMovement, MovementEvent, PowerEvent, ButtonClickID, ButtonClickAction, AmberAlertState, AmberAlertTimerValue, HeartRateAlert, UserID for GH5200
- Add 'BLE_1_Sensor_Custom1..4', 'BLE_2_Sensor_Custom1..4', 'BLE_3_Sensor_Custom1..4',
- Add BatteryVoltage for FMB204 device
Teltonika build 6168 (2021-12-16) *note: in beta and dependent on Camera plugin until January 2022 release
- Fix parsing BLE_FuelFrequency values for FMB122 device
- Change picture name to guid
Teltonika build 6134 (2021-12-03)
- Add FaultCodes for FMB001 and FMU130 devices
- Add variables from FMB140 to FMB130
- Extend FMB122 functionality
- Extend FMB204 functionality
Teltonika build 6124 (2021-11-26)
- Increase Dualcam buffer and disable CRC validation
- Add UnplugDetection for FMT100 device
- Add FridgeTemperatureProbe1..4 for FMB640 device
Teltonika build 6106 (2021-11-22)
- Fix CRC calculation for dualcam picture frames
Teltonika build 6081 (2021-11-12)
- Add VIN for FMB001 device
Teltonika build 6013 (2021-10-19)
- Fix dualcam data parsing
- Fix parsing AVL ID 87 value for multiple devices
Teltonika build 5990 (2021-10-12)
- Fix parsing LVCAN_FuelLevelPerCent for FMC130 device
Teltonika build 5983 (2021-10-07)
- Add 'VehicleIdentificationNumberPart1' for FMB640
- Add 'CAN300_EngineTemperature', 'CAN300_TotalFuelUsed', 'CAN300_FuelLevelLiters' for FMM130 device
- Add 'TellTale0/1/2/3' for FMB640 device
- Add 'BLE_Temperature1', 'BLE_Sensor1_Raw' for FMU130 device
- Add 'BLE_Temperature1/2/3/4', 'BLE_Temperature1/2/3/4_Valid' for FMC130 device
Teltonika build 5974 (2021-10-05)
- Improve dualcam protocol
Teltonika build 5922 (2021-09-15)
- Add SecurityStateFlags_P4 for FMB120 device
Teltonika build 5919 (2021-09-10)
- Fix parsing dualcam picture data
- Add EscortLLSTemperature_1/2, EscortLLSFuelLevel_1/2 , and SecurityStateFlags_P4 for FMB140 device
Teltonika build 5872 (2021-08-26)
- Add support for Dualcam
- Add 'Immobilizer' for FMU130 device
- Add 'ExternalVoltage' for FMB003 device
- Add 'EventID' for FMC130 device
Teltonika build 5821 (2021-08-03)
- Add IgnitionOnCounter for FMC130 and FMU130 devices
Teltonika build 5819 (2021-07-29)
- Add Axis X/Y/Z for FMB640 device
Teltonika build 5813 (2021-07-23)
- Add BLE Fuel Frequency 1-4 to FMU130
Teltonika build 5810 (2021-07-18)
- Add all LLS variables to FMB640 (IDs 201-204, 210-215, 721-724)
Teltonika build 5792 (2021-07-06)
- Add manual CAN data for TFT100
Teltonika build 5760 (2021-06-29)
- Add FM3001's variables to FMM001
Teltonika build 5756 (2021-06-28)
- Add UL202 inputs to FMB125
Teltonika build 5745 (2021-06-23)
- Extend FMB125 functionality with CAN300 variables
Teltonika build 5725 (2021-06-18)
- Add custom inputs to FMC640, add ICCID to FMB920
Teltonika build 5682 (2021-06-09)
- Add support for Geolocation
Teltonika build 5673 (2021-06-08)
- Change Driver1Name, Driver1Surname and DTC_Value to string
Teltonika build 5648 (2021-06-02)
- Add FMB204 device
Teltonika build 5640 (2021-05-31)
- Add variables for FMM130 and FMB640
Teltonika build 5580 (2021-05-06)
- Add BatteryLevel (AVL ID 113) to FMB920
Teltonika build 5577 (2021-05-05)
- Add BLE sensors for the FMB122 device
- Add Movement for the FMP100 device
Teltonika build 5496 (2021-04-14)
- Add parameters to the FMB003 device
Teltonika build 5469 (2021-04-08)
- Add parameters to the FMC130 device
Teltonika build 5420 (2021-03-26)
- Add UnplugDetection for the FMP100 device
Teltonika build 5401 (2021-03-22)
- Add VehicleRangeOnBattery for the FMB120 device
- Add FMP100 device
Teltonika build 5267 (2021-02-17)
- Add DallasTemperature1 for the FMB130 device
- Add FMM001 device
- Add DataMode, Trip, TripOdometer, TotalOdometer for the TFT100 device
- Fix BLE_Temperature{1..4}, BLE_BatteryVoltagePercent{1..4}, BLE_Humidity{1..4} values for FMC640 device
- Add FMM125, FMM130, and FMM640 devices
Teltonika build 5169 (2021-02-11)
Teltonika build 5027 (2020-12-18)
- Add 'ExternalVoltage', 'BatteryVoltage', 'GsmSignalStrength', 'SatelliteCount', 'JammingDetection', 'Movement' for FMU130 device
Teltonika build 4983 (2020-11-27)
- Add 'CAN300_EngineOilLevel' and 'CAN300_EngineTemperature' for FMB 122, FMB130, FMU130 devices
- Add BLE sensors for FMC640
- Extended supported inputs by FMC640 device
- Extended supported inputs by TFT100 device
Teltonika build 4910 (2020-11-04)
- Add 'BLE_Temperature{1..4}_Valid' for devices which supports 'BLE_Temperature{1..4}'
Teltonika build 4898 (2020-10-29)
- Fix 'Tachograph_Driver1_ID' and 'Tachograph_Driver2_ID' values
- Add 'CAN200_DoorStatus' for FMB122/FMB130 devices
- Fix parsing 'CAN300_EngineWorkTimeCounted' value
- Fix BLE_Temperature values